Freedom to collaborate and innovate: open design for materials and machine access.
Printed parts demonstrate excellent sidewall quality and fine
detail, contributing to lower post-finishing requirements.
Cost-effective ownership throughout entire life cycle.
Automatic control of surface level and processing parameters.
Fabricate beautiful, high-performance models, appliances, and prosthetics on a single printer with a wide range of rigorously tested 3D printing materials.
Build Volume | 250 × 250 × 250 mm 9.8 × 9.8 × 9.8 in |
Accuracy | Dimension <25.4 mm: ±0.025 mm Dimension ≥25.4 mm: ±0.1% x Dimension |
Layer Thickness | 0.05-0.25 mm |
Laser | 355 nm, solid-state frequency tripled Nd: YVO₄ |
Beam Size | 0.06-0.08 mm |
Material | Compatible with commercial available resins for 355 nm stereolithography |
Scanning Speed | 6-10 m/s |
Controlling Software | UnionTech™ RSCON |
Data Preparation Software | Polydevs |
Operation System | Windows 10 |
Network Type and Protocol | WiFi, Ethernet Using MQTT, HTTP, TCP |
Electrical Requirements | 200-240 VAC, 50/60 Hz, Single phase |
Rated Power | 2.4 kVA |
Systems Control | Closed-loop |
Temperature Range | 72–79 °F (22–26 °C) |
Maximum Change Rate | 1 °C/hour |
Relative Humidity | < 40% |
Machine Size (W x D x H) | 1090 × 1000 × 1850 mm |
Machine Weight | 726 kg |
Initial Resin Weight | 43 kg |
Resin Vat | Manually Replacing |
Processing and Finishing | Post-Curing Unit (optional) |
Warranty | 12 Months |