Email Us
s300 dlp 3dprinter 01

EvoDent S300+ New Generation DLP 3D Printer

Large Scale Dental 3D Printer, Digital Dentistry Workflow Solution

The built-in Unionfab ONE system, with slicing software inside, making it easy to printing. Compared with the first generation S300, the S300+ printer uses optical path sealing technology, the life of optical machine is greatly enhanced!


EvoDent S300+ Technical Data

Build Volume(XYZ)250 x 140 x 240 mm (9.83 × 5.53 × 9.45 in)
Accuracy

±0.05 mm

Layer Thickness

0.05 / 0.1 mm

Print Speed

60 mm/h

Pixel Size

65 μm
Resolution3840 × 2160 HD
Wavelength

405 nm

Projection ModeBottom-up Projection
Controlling SoftwareUnionTech™ DSCON
Data Preparation SoftwarePolydevs
Operation SystemWindows 10
Input File Format.utk
Network Type and Protocol

WiFi, Ethernet

Using MQTT, HTTP, TCP, UDP, FTP

Electrical Requirements200-240 VAC, 50/60 Hz, Single phase
Rated Power800W
Systems ControlClosed-loop
Temperature Range72–79 °F (22–26 °C)
Maximum Change Rate1 °C/hour
Relative Humidity< 40%
Machine Size (W x D x H)600 × 510 × 1450 mm
Machine Weight122 kg
Resin VatReplaceable Film
Processing and FinishingPost-Curing Unit (optional)
Warranty12 Months Service and Support, under UnionTech Purchase Terms and Conditions
Regulatory ConformityCE / UKCA




Contact Us

Related Digital Light Processing (DLP) 3D Printers

Email us: hello@uniontech3d.com
Call us on: 4001-388-966
Address: Room 102, Unit 40, 258 Xinzhuan Rd, 201612 Shanghai, China